600 חתיכות הלחמה חותם חוט מחברים עצמי הלחמה חום באט הפסיכולוג מחבר עמיד למים מבודד חשמל התחת אחוי חוט מסופי עבור ימי

תכונות מוצר

Material:

PVC

Color:

red, blue, yellow, white, black

Operating temperature range:

Operating temperature:

-55°C to 125°C (-67°F to 256°F)

Minimum shrink temperature:

80°C (176°F)

Minimum temperature for solder to melt:

138°C (280.4°F)

Size:

Red connector:

approx. 2.7 mm in diameter, cable cross-section 0.5 to 1.0 mm²

Blue connector:

approx. 4.5 mm in diameter, cable cross-section 1.5-2.5 mm²

White connector:

approx. 1.7 mm in diameter, cable cross-section 0.25-0.34 mm²

Yellow connector:

approx. 6.0 mm in diameter, cable cross-section 4.0-6.0 mm²

Black connector:

approx. 4 mm and 20 mm in length

How to use:

1. Strip the 2 wires that going to connect and select the right size of connector. :

2. Thread the connector to one of the wires and then twist the 2 conductors together. :

3. Move the connector to the middle of the conductor. :

4. Apply heat to the connector slowly and evenly with a hot air gun with nozzle until it melt with the wire. :

Package includes:

70 x Red connector :

60 x Blue connector :

50 x White connector :

20 x Yellow connector :

400 x Black connector :

Note:

There may be small deviations due to manual measurement. :

It's recommend that use a heat gun with nozzle to heat the connector. :

Please rotate the wire when you are heating or surround the wire to heat so that the tube was heated evenly. :

It's recommend to keep 3 to 5 cm/ 1.18 to 1.96 inch between the nozzle to the connectors. :